Description
1. JXQ mining skip is used for hoisting coal or waste rock in inclined shaft or tunnel.
2. Large capacity and high operating speed.
3. Smooth and safe operating.
4. Simple structure and high unloading capacity.
5. When the water inflow rate of the tunneling working face is lower than 5m³/hr, the water can be hoisted together with the coal or waste rock by pneumatic submersible pump.

Operating Standard
MT20-90 vertical shaft multi-rope hoisting coal skip
Q/LXZG 05-2011 JXQ series inclined shaft skip

Features
1. This front dump mine skip features simple structure, short distance unloading and large capacity.
2. When the mining skip is hoisted to the rollover stand, they will rotate forward over a fixed axis with an angle between 45° and 55°.
3. The mining skip and the rollover stand reset will return to the right track after unloading.
4. Advantages of inclined shaft mining skip over vertical shaft mining skip.
(1) Simpler structure: the inclined shaft mining skip runs on an inclined track, totally different with the vertical shaft mining skip on structure and unloading position.
(2) Less initial investment.
(3) Simpler ground layout.
(4) Larger capacity.
(5) Automatic unloading.
(6) More excellent hoisting performance.
(8) Better-matched with the mechanical configuration of mucking loader.

Parameter

Item		JXQ6/9-5	JXQ6/9-7.5	JXQ6/9-10	JXQ6/9-15	JXQ6/9-20
Volume (m³)		2	3	4	6	8
Net Weight (KG)		1378.5	1975.6	2240	3153.6	4105.6
Track Gauge D (mm)		600/900	600/900	600/900	600/900	600/900
Load Capacity (t)		5	7.5	10	15	20
Axle Gauge C		1600	1700	1800	2000	2200
Wheel Diameter D (mm)		350	350	350	350	350
Nominal Traction (KN)		60	60	60	90	120
Applicable Shaft Inclined Angle		≤25°	≤25°	≤25°	≤25°	≤25°
Min. Turning Radius (m)		20	20	20	20	20
Overall Dimension (mm)	Length	3980	4303	4643	5560	6477
		1184	1390	1485	1490	1495
		1270	1281	1391	1500	1600

Maintenance
1. Frequently check the working conditions of the mining skip. Regularly maintain major parts.
2. Lubricate each oil cup and oil hole one time per shift.
3. Check all the bolts one time per shift.
5. Open the wheel cover weekly, and check the wear condition of axle and adjust the clearance.

Note
1. Operating speed of the mining skip
(1) The hoisting speed of the skip in the inclined shaft should not be faster than 5m/s.
(2) Sudden dropping and placing skip upside down is strictly prohibited during the transporting and parking.
(3) Hoisting the skip to the right position according to the specific requirement to prevent deformation.
2. Human transportation is strictly prohibited.
3. Overloading is strictly prohibited.